Boom Supersonic Reveals Refined Overture and Announces Landmark Market-Expanding Alliance with Northrop Grumman and New Tier One Suppliers

Boom unveils the updated Overture, expands market opportunity with Northrop Grumman in strategic collaboration to offer a special mission Overture variant for US military and allies, and signs agreements with Collins Aerospace, Safran, and Eaton

DENVER, July 19, 2022 Boom Supersonic, the company building the world’s fastest airliner, optimized for speed, safety, and sustainability, today presented the refined design of Overture and also announced a new partnering agreement with Northrop Grumman to develop special mission variants of the aircraft.  Carrying 65–80 passengers at twice the speed of today’s airliners and running on 100% sustainable aviation fuel (SAF), Overture will fly Mach 1.7 over water with a range of 4,250 nautical miles.  

Today’s Overture reveal at the Farnborough International Airshow is the culmination of 26 million core-hours of simulated software designs, five wind tunnel tests, and the careful evaluation of 51 full design iterations, resulting in an economically and environmentally sustainable supersonic airliner.

“Aviation has not seen a giant leap in decades. Overture is revolutionary in its design, and it will fundamentally change how we think about distance,” said Boom Founder and CEO Blake Scholl. “With more than 600 routes across the globe, Overture will make the world dramatically more accessible for tens of millions of passengers.”

With this updated configuration, Boom combines a number of engineering innovations in aerodynamics, noise reduction, and overall performance.

Key Features:

Four-engine design: Overture will be powered by four powerful, wing-mounted engines that enable the airliner to cruise at Mach 1.7 over water and just under Mach 1 over land. Additionally, the four-engine design reduces noise while also decreasing costs for airline operators. Engine placement was selected to conform to the strictest passenger safety requirements.

Quieter operation: On take-off, Overture will use the world’s first automated noise reduction system. The airliner will fly without afterburners, meeting the same strict regulatory noise levels as the latest subsonic airplanes. These noise reduction efforts will deliver a quieter experience both for passengers and airport communities.  

Contoured fuselage: According to the principle of area-ruling, Overture’s fuselage has a larger diameter toward the front of the aircraft and a smaller diameter toward the rear. Boom has applied this design technique to minimize drag and maximize fuel efficiency at supersonic speeds.

Gull wings: The aircraft’s wings are sculpted to enhance supersonic performance as well as improve subsonic and transonic handling. Importantly, the wing shaping also helps ensure safety and stability at any speed.

Carbon composite construction: Overture will incorporate carbon composite materials into the majority of the build that are lighter, stronger, and more thermally stable than traditional metal construction. Carbon composites can also be manufactured with highly complex curvature, contributing to the aircraft’s aerodynamic efficiency.

Net zero carbon: Overture has been developed from the beginning to be net zero carbon, flying on 100% SAF. Sustainability is woven into all aspects of Overture, from design and production to flight and end-of-life recycling.

Overture Specifications:

  • Cruise speed: Mach 1.7 supersonic, Mach 0.94 subsonic
  • Range: 4,250nm with full payload
  • Passengers: 65–80
  • Exterior Dimensions: Length: 201 feet, Wingspan: 106 feet, Height: 36 feet
  • Interior Dimensions: 79 feet long, up to 6.5 feet height at aisle
  • Airframe: composite fuselage, wing, vertical, and horizontal
  • Wing: gull with digital leading and trailing edge flap control
  • Flight controls: 4x redundant digital fly-by-wire on 2 LRUs
  • Powerplant: 4x medium-bypass 100% SAF-compatible turbofan
  • Airport Community noise: ICAO Chapter 14 / FAA Stage 5

Additionally, the company announced today that it will begin outfitting The Iron Bird, a new 70,000-square-foot hardware ground test facility in Centennial, Colorado to house its first full-scale Overture testing model and flight deck simulators. The test model, also called an iron bird, will be used for integrating Overture’s flight hardware, software, and systems. Earlier this year, Boom announced its selection of the Piedmont Triad area for its first Overture Superfactory and remains on track to begin production in 2024.

Boom signs partnering agreement with Northrop Grumman:

Today at The Farnborough Airshow, Boom Supersonic also announced a landmark partnering agreement with Northrop Grumman to develop special mission variants for the U.S. Government and its allies.

“Time is a strategic advantage in high consequence scenarios, from emergency evacuations to disaster response,” said Scholl. “This collaboration between Boom and Northrop Grumman unlocks the potential for Overture to provide the US and our allies with an unmatched high speed capability when and where it’s most needed.”

Together, the two companies will pursue new use cases for Overture to support government and military operations that require rapid response, including quick-reaction surveillance and reconnaissance, command and control, as well as mobility and logistics missions such as emergency medical and troop transport.

“Pairing Northrop Grumman’s airborne defense systems integration expertise with Boom’s state-of-the-art Overture supersonic aircraft makes perfect sense,” said Tom Jones, president of Northrop Grumman Aeronautics Systems. “Together we can ensure military variants of Overture are tailored for missions where advanced system capabilities and speed are critical.”

Collins Aerospace, Eaton, and Safran Landing Systems Join Overture Program

As it continues to build the supply chain for Overture, Boom announced new and expanded relationships. Collins Aerospace, Eaton, and Safran Landing Systems are joining the Overture program, supplying key systems such as landing gear, fuel and inerting, air data, and ice protection.

About Boom Supersonic:

Boom Supersonic is transforming air travel with Overture, the fastest and most sustainable supersonic airliner. Carrying 65–80 passengers, Overture will fly at twice the speed of today’s airliners and will run on 100% sustainable aviation fuel (SAF). Overture’s commercial order book, including purchases and options from United Airlines and Japan Airlines, stands at 70 aircraft. Boom is also working with the United States Air Force and Northrop Grumman for military and defense applications of Overture. Suppliers collaborating with Boom on the Overture program include Collins Aerospace, Eaton, Safran Landing Systems, and Rolls-Royce. Designed and built in the United States, the first Overture aircraft begins production in 2024, rolls out in 2025, begins flight test in 2026 and flies first passengers in 2029.

For more information, visit https://boomsupersonic.com  
Updated photos and video available at https://boomsupersonic.com/press

Media Contact:

Aubrey Scanlan for Boom Supersonic
press@boom.aero  

Connect with Boom Supersonic on Twitter, LinkedIn, Facebook, Instagram, YouTube


Share

Stay up to speed

Subscribe to the newsletter for Boom news and insights straight to your inbox.

This field is for validation purposes and should be left unchanged.